Skip to content

Gqeberha

067 397 3341
Fitting

Curtain rails and blinds in Port Elizabeth: who fits them and what it costs

7 min read · Gqeberha

Curtain rails, blinds and floating shelves are sold in almost every shop in Port Elizabeth, and then you are on your own once you get them home, because the shop sells the product and nothing else. Fitting them is handyman work, and it is quoted as a fixed price per rail, per blind or per shelf before anything is booked. That gap between buying and fitting is the real problem, and it is the reason so many rails sit in their boxes in a passage for months. The box is not the problem. The wall behind the window is the part that decides whether the job takes twenty minutes or an afternoon.

This covers what fitting costs, why the wall under the plaster decides half the price, how to get every window in the house done in a single visit, and what to have ready so the job does not stop halfway through. If the boxes are already in the house in Gqeberha, most of this can be priced from a photo and a rough measurement rather than a site visit. Two measurements per window are usually enough: the width, and where the bracket line falls relative to the ceiling or the cornice.

Sold everywhere, fitted by nobody

Walk through any hardware shop or home store in Gqeberha and you will find rails and brackets on the shelf, blinds in every width, and shelves in three finishes. What you will not find is anyone who will come to your house and put them up. Fitting is treated as an afterthought, something the buyer is expected to manage with a borrowed drill, a free Saturday and a certain amount of hope. The result is a lot of crooked rails, and a lot of holes that had to be filled in again afterwards.

It is a small job by trade standards, which is exactly why it falls through the gap. Bigger contractors are not interested in short jobs, and the job still needs a level, the right drill bit, a ladder and someone who can read what the wall is made of before the first hole goes in. Get the first fixing wrong and the rail sits crooked for years, because the holes are already in the wall and moving them means filling and repainting. That is why the wall question comes first, before the brand of the rail or the colour of the blind.

What fitting costs

  • Curtain rail fitted, standard window: R320 to R550
  • Curtain rail, long or double: R400 to R750
  • Blind fitted, including brackets and drilling: R350 to R650
  • Floating shelf fitted, level and anchored for load: R280 to R500

Those are fixed prices for the work itself, agreed before anything starts. The rail, the brackets, the blind, the shelf and any longer screws are materials, and they are quoted separately and approved by you before anything is bought. A long or double rail costs more than a standard one because there is more of it to level and more fixing points to find, not because of any markup on the hardware. Fitting is priced by the window, so a wide living room window and a small bathroom window are not the same job even when the rail looks identical.

The wall decides the fixing

Two windows that look identical from inside can be completely different jobs once the wall is involved. Solid masonry takes a masonry bit, a wall plug and a screw, and that fixing is strong from the first turn. Plasterboard takes almost nothing on its own, so the rail has to find the timber studs behind the board, or use a hollow wall anchor rated for the load. In a house built of brick with a plasterboard feature wall, both answers can be true in the same room, sometimes on the same wall. An older coastal house often has more masonry than it looks, while a newer one may be plasterboard throughout, and the age of the suburb tells you very little about what is behind the paint.

  • Brick or concrete: the easiest version, and the bracket goes where you want it
  • Plasterboard with studs behind it: strong once the studs are located, but the bracket follows the studs
  • Plasterboard with no stud where you need one: needs the right anchor, and a long rail needs more than one secure point
  • Cornices and window reveals: the rail often has to sit below a cornice, which changes the height and sometimes the bracket type

This is the part that cannot be priced from a description alone. A photo of the wall above the window, with a bit of the cornice or ceiling in the frame and something for scale, usually answers it well enough to quote without a site visit. If the wall turns out to be different from what the photo suggested, the price gets discussed before work starts rather than added afterwards.

Doing every window in one visit

Fitting is mostly preparation and setup. The ladder comes in, the wall gets read, the brackets get marked and the holes get drilled, and that is the slow part of every window. Once it is done for one window, the second and third take far less time, so the cost per window drops with each one. Four rails booked as a single visit end up costing noticeably less than four separate bookings, and it is the setup and the travelling that you are saving on. Walk through the house, count the windows and settle the whole list before booking anything. It also pays to decide up front whether any of the windows want blinds instead of curtains, because fitting a rail and then changing your mind doubles the work for no good reason.

Rails or blinds: which suits which window

  • Bedrooms and living rooms: a rail with curtains gives the softer finish and covers a wide window best
  • Kitchens and bathrooms: blinds handle steam and moisture better than fabric, and take up less space
  • Bay windows and long openings: a long or double rail, with more than one bracket point along its length
  • Sliding doors and large glass: a long rail for curtains or a wide blind, and both need the top fixing to carry real weight

What to have ready before the visit

  • The rail, blind or shelf out of the box, with the brackets and screws that came with it
  • The curtains, or the weight of the fabric, if the rail is carrying something heavy
  • A clear window and floor area, so a ladder can stand safely and squarely
  • A note of anything unusual about the wall, such as an old repair, a plug socket or a cable route

If the rail has already been bought, check the bracket pack before the visit. A rail sold with short screws and plastic plugs will often need different fixings on a masonry wall, and it is much easier to sort that out beforehand than halfway up a ladder with the holes already drilled.

The short version

Fitting a rail is not difficult, but it does need the wall read correctly and the first fixing in the right place. Get those two things right and the rail stays where it was put for years, the curtain hangs straight, and nobody has to look at a row of abandoned holes above the window. The awkward ones are the long rails and the walls with nothing solid behind them, and even those are routine once the fixing is planned rather than improvised.

If you have a box of rails, blinds and shelves waiting, send one photo per window on WhatsApp with a rough width for each. That is usually enough to price the whole house as a single visit, and you get the fixed price back before any date is set. If you are not sure how many windows there are, one photo down the passage with the doors open tells the story quickly enough.

Got a list that needs working through?

Send it on WhatsApp with a photo or two and you get a price back, before anything is booked.

Send the list

More advice

The suburbs

Bluewater Bay, Seaview and Beachview: why a list beats a quick call-out

A single dripping tap is not worth the drive out to Beachview. A list of six jobs is. How north coast visits are planned and what tends to fail there.

Read it

Fittings

Shelves that actually hold: brackets, plaster and the weight question

Almost every shelf failure comes down to the bracket being chosen for the look rather than the wall. How to drill into the wall you actually have.

Read it

Pools

Getting the pool ready for December: the six-week plan

Recovery is a sequence, and it takes weeks because chemistry and filtration work on time. The six-week plan that makes December easy.

Read it

Pools

Pool filter sand and cartridges: the service most pools skip

A pool filter fails so slowly nobody notices until the water never quite clears. The signs, the media types, and what replacing it costs in Gqeberha.

Read it

Rentals

Landlord turnarounds in Lorraine, Framesby and Kabega Park: the punch list that gets the deposit back

The move-out punch list that gets a Gqeberha deposit back: room by room, what counts as wear and tear, the five repairs that cost tenants, and how to time a turnaround.

Read it

Assembly

A wardrobe and a bed, assembled: what breaks and what it costs to put right

A two door wardrobe and a bed base are the two items most often half-assembled. What each costs, the failures that break them, and when to rescue rather than replace.

Read it

Tiling

Tile over tiles or strip first? What each costs in Port Elizabeth

Tiling over an existing floor is faster and cheaper on paper. Here is when it is legitimate, what the height does to doors and skirtings, and what stripping really adds.

Read it

The suburbs

Older homes in Newton Park, Charlo and Mount Croix: the jobs that keep coming back

The older inner suburbs of Port Elizabeth share the same tired fittings. The five jobs that repeat across the area, what each costs, and how to batch them into one visit.

Read it

Plumbing

A toilet that keeps running: what it costs to fix

A running toilet has four causes and a two-minute diagnosis. Which part to replace, what it costs, and when it becomes a plumber's job.

Read it

Assembly

Flat pack assembly: time, tools and the parts that break

What is actually in the box, the tools that matter, where the time goes, and the four failures that turn a one visit job into two in Gqeberha.

Read it

Tiling

Tiling in Port Elizabeth: what it costs per square metre in 2026

The per square metre price is the most quoted number in tiling and the least useful one. Here is what the published ranges cover, and how to get a real figure.

Read it

Pools

Pool pump not working: the eight faults and what each one costs

A pool pump fails in one of three ways: silent, humming, or running without moving water. The two-minute check finds the fault, and each repair is priced per job.

Read it

Areas

A handyman visit in Summerstrand, Walmer and Newton Park

Three suburbs minutes apart, three different kinds of job. What salt air does on the beachfront, what older houses need in the centre, and what a visit covers.

Read it

Painting

Painting touch-ups after a repair: why the patch shows

A touched up patch almost always shows, even when the colour matches. What the wall has done to the old paint, and how far back a repair has to go.

Read it

Roofing

Roof leak repair in Port Elizabeth: what it costs in 2026

Roof work is the least predictable job on any list. What the money actually goes into, and what a leak costs to repair in Gqeberha.

Read it

Waterproofing

Roof waterproofing in Port Elizabeth: priced per job, not per square metre

Why this site prices a waterproofing job rather than a square metre, where tiled roofs actually fail on the coast, and what the work costs.

Read it

Doors

Why your door sticks in winter, and why sanding it makes next winter worse

A sticking door is the timber moving with the seasons, not the timber being too big. Sanding the edge clears it now and sets up next winter's return.

Read it

Scope

What a handyman can and cannot legally do in South Africa

The one line that decides whether a job is handyman work or a registered trade, and how to read the answer before you book anyone.

Read it

Assembly

Flat pack furniture assembly in Port Elizabeth: what it costs per item

Flat pack furniture is priced per item, not per box. What a bed and a wardrobe cost to assemble in Port Elizabeth, and why a missing fitting stalls the job.

Read it

Doors

Hanging a door in Port Elizabeth: what it costs and what is involved

A door is a slab of timber going into a frame that has had decades to move. What the job actually involves, and what it costs in Gqeberha.

Read it

Leaks

Water coming through the ceiling: what to do in the first hour

What to do in the first hour when water starts coming through a ceiling, why poking the bulge is a mistake, and how the leak is traced back to its actual source.

Read it

Landlords

A rental maintenance checklist for Gqeberha landlords and agents

Running a rental on a checklist instead of on complaints means one planned visit instead of five separate ones. The list, and what it costs.

Read it

Small plumbing

A dripping tap in Port Elizabeth: what it costs and when it needs a registered plumber

A dripping tap costs you on the water bill and on your sleep. What the repair costs in Port Elizabeth, and where the plumber has to take over.

Read it

TV mounting

TV wall mounting in Port Elizabeth: what it costs and which wall you have

One number decides most of the price before anyone arrives: what your wall is made of. How to check, and what fitting a bracket actually comes to.

Read it

Odd jobs

No job too small: the odd jobs a handyman actually does

The hardest job to get done in a house is never the big one, it is the single small thing. Here is the actual list, and why batching them pays.

Read it

Coastal

Salt air and rust: what coastal Gqeberha does to doors, windows and fittings

Salt air corrodes the fittings that hold a coastal home together. What the sea does to doors, windows and gate hardware in Gqeberha, and what the repairs cost.

Read it

Cupboards

The cupboard hinge that pulled out of the chipboard

Once the screw holes in chipboard strip, tightening the same screw never works again. Here is which repair holds, and what it costs in Gqeberha.

Read it

Pricing

What a handyman costs in Gqeberha

What the common jobs actually cost in Gqeberha in 2026, why an hourly rate is a bad deal for the person paying, and how to judge a quote you have been handed.

Read it

The list

The small-job list: twelve things worth booking in one visit

The jobs that sit on the fridge door for a year. How long each one takes, which ones belong in one visit, and how to split a long list sensibly.

Read it

Complexes

Complex access: what to have ready before a handyman arrives

Access registers, POPIA requirements, noise hours and lift rules. The details that decide whether a booked visit starts on time or stalls at the boom.

Read it

Send the list. Get a price. Get it done.

One or twenty jobs, it makes no difference. The more you put on the list, the better the visit works out.

WhatsApp your listCall 067 397 3341

No price is agreed until you approve it

Call nowGet a quote