A rental stays in good order when it is run on a checklist rather than on complaints, and in Gqeberha that is the difference between one planned visit and five separate ones. A checklist turns a steady stream of unexpected messages into a single visit, and on a rental that is where the money is saved. The complaints version always arrives at the worst possible time, usually the week a tenant hands in notice.
Here is a working checklist for landlords and letting agents in Port Elizabeth, split into the two moments that matter: the move-out turnaround and the gap between tenants. Most of the rental stock sits in the northern suburbs, Lorraine, Framesby, Sunridge Park, Kabega Park, Westering, Malabar and Algoa Park, and that is where most turnarounds get done.
Why a checklist beats reacting to complaints
Tenants report faults in the order they personally notice them, not in the order that matters to the unit. You hear about the dripping tap in the last month of a lease and never hear about the cupboard door that has been hanging on one hinge for a year, because the tenant simply stopped using that cupboard. The result is a unit that looks fine in the photographs and costs a fortune to bring back to standard in the last week of a tenancy.
The other problem with reacting is that small faults grow in ways that cost real money. A sticking door gets forced until the frame or the hinges give. A toilet that runs gets left running, and the washer or valve that would have sorted it early is not the only problem by then. A checklist finds those things while they are still cheap, and it gives you a record of the unit's condition that is worth having when a deposit gets discussed. You do not need a maintenance schedule with dates against it. You need a list you walk through before every tenancy, and the discipline to fix the whole list in one go rather than one item at a time.
The move-out turnaround list
- Every door in the unit. Does it close without being pushed, and does it catch anywhere in its swing?
- Cupboard and wardrobe doors. Any hanging crooked, dropped at one corner, or loose on its hinges?
- Drawers. Any runner that grinds, sticks or lets the drawer drop off its track?
- Taps. Any drip from a closed tap, hot or cold, and is the base of any tap loose?
- Toilets. Seat cracked, loose or missing a fixing, and does the cistern stop filling when it should?
- Silicone around the bath, basin and shower. Has it gone black, lifted at an edge, or pulled away from the tile?
- Walls. Nail holes, scuff marks, and any patch that needs filling and painting before it is seen by a new tenant.
- Curtain rails and blinds. Brackets that have pulled out of the wall, and rails that have sagged in the middle.
- Skirtings and window frames. Scuffing, chipped paint, and any timber that has swelled from a previous leak.
Walk the unit with the list in hand and take a photo of every item as you find it. That set of photographs is what makes a quote possible without a second visit, and it is the same set you want on file when the next tenant takes occupation.
The between-tenants repair list
- Sticking doors adjusted. Usually a swollen door meeting a frame, and often worse in winter.
- Cupboard and wardrobe doors rehung, on new hinges where the old ones are worn through.
- Hinge plates that have pulled out of chipboard repaired, which is common on kitchen units in older rentals.
- Drawer runners replaced where the runner itself has failed rather than just come loose.
- Toilet seats replaced, and fill or flush valves sorted where a cistern runs on.
- Dripping taps and worn washers replaced.
- Silicone redone around the bath, basin and shower where it has gone black or lifted.
- Wall patches filled and painted, so the paint is dry before the new tenant's furniture arrives.
One thing worth being clear about on scope, because it saves an argument later. Taps, toilets, washers, seats and fill valves are handyman work. Pipework, geysers, buried drainage and anything on the water supply beyond a fitting are a registered plumber's job. Fixed electrical work, including new sockets and anything needing wiring, belongs to a registered electrician. A leaking geyser gets referred rather than quoted, and you are told that before anyone travels.
The access problem is the part that eats the day
On a rental, getting in is often more work than the job. A complex or estate may want the contractor booked in at the gate, a copy of a work order, a named contact, and a time window that security will honour. Some want work done inside certain hours so noise does not reach the neighbours, and some will not let a vehicle past the boom without a booking reference.
That is why the access arrangements should go into the first message, not the morning of the visit. Which complex, which unit, the estate name, who is meeting whoever arrives, and whether there is a tenant in place who needs notice. There is a separate article on how complexes and estates around Gqeberha handle contractor access, linked below, and it is worth reading before a turnaround is booked.
Why batching the whole list into one visit matters more on a rental
In a home you own, you can spread small jobs out over months as they annoy you. On a rental that is a costly habit. Every separate visit means arranging access again, finding out who has the keys, getting a tenant to be home, and doing the same travelling and setting up for a fraction of the work. The whole list in one visit costs noticeably less than the same list split across three or four visits, because the travel and setup is paid once. There is also a sequencing point that trips people up on a turnaround. A patched wall needs to be painted and dry before anything is hung against it. Silicone needs time to cure before the shower is used. Anything involving the water supply has to be done while the unit is still empty, not after the new tenant has moved in and started unpacking around it.
What the work costs
- Rental maintenance visit, working through a list of small repairs: R900 to R2,400
- Sticking door adjusted: R280 to R500
- Cupboard door rehung on new hinges: R250 to R500
- Drawer runner replaced: R300 to R500
- Toilet seat replaced: R250 to R500
- Dripping tap or washer replaced: R350 to R650
- Silicone redone on a bath or basin: R450 to R800
- Wall patch filled and painted: R300 to R700
The rental maintenance band covers a visit that works through a list of small repairs, and where it lands in that band depends on how long the list is and what is on it. Single items are priced individually, as above. Fittings, hinges, runners, seats and valves are quoted separately and approved before anything is bought. What makes a quote accurate is one message with the unit, the list as you wrote it, and a photo of each item. Send that and you get a fixed price back, rather than a figure that moves once someone is standing in the doorway.
A quote on a rental is only as good as the list behind it. A vague list produces a vague price, and the person who ends up explaining an extra amount to a landlord or a tenant is never the one who wrote the list.
The short version
Run the unit on a checklist before every tenancy rather than on tenant complaints, walk it with the list and photograph every fault you find, then clear the whole list in one visit while the unit is empty. Sort the access arrangements and the keys out in the same message that carries the list, and keep plumbing beyond a fitting, fixed electrical work and geysers for the registered trades. Send the list and the photos on WhatsApp, with the complex or estate name and who will be meeting whoever arrives, and you get a fixed price for the turnaround before anything is booked.
Got a list that needs working through?
Send it on WhatsApp with a photo or two and you get a price back, before anything is booked.
Send the list