Skip to content

Gqeberha

067 397 3341
TV mounting

TV wall mounting in Port Elizabeth: what it costs and which wall you have

6 min read · Gqeberha

TV wall mounting looks like a twenty minute job and is priced like a real one. That gap confuses people, so it is worth explaining properly. The reason is simple: fitting a bracket is not really about the TV. It is about what is behind the plaster, and that is the part nobody can see from the photo you send.

Here is what the job costs in Port Elizabeth, and how to work out which of the three wall types you are dealing with before you buy anything.

What TV mounting costs

  • TV bracket fitted to brick or concrete: R400 to R750
  • TV bracket fitted to drywall, studs located: R450 to R900

Those are labour figures, in line with the ranges on the pricing page. The bracket itself and any cable trunking are quoted separately, and nothing gets bought before you have approved it. The difference between the two prices is not a markup. It is the work, and the next section explains why.

Brick, concrete and plasterboard are three different jobs

A bracket on a solid brick wall is the straightforward version. A hammer drill goes in, four masonry anchors go in, and the bracket is level and carrying load within the hour. The weight of a modern TV is well within what four proper masonry anchors hold, so the wall is doing the work and the bracket is just transferring it.

Concrete is the same idea with more resistance and more dust. Slower to drill, hard on bits, and it needs masonry anchors of the right length rather than whatever is in the box. If your wall is concrete and the job takes an extra half hour, that is time on the drill, not padding.

Plasterboard is where it changes completely. Plasterboard holds almost nothing on its own. A bracket screwed into a sheet of it will hold for a while and then let go, usually at the worst possible moment, because a TV is a lever pulling on those screws every time it tilts. The fix is to find the studs behind the board and fix into timber, which means the exact position of the bracket is no longer a design choice. It is wherever the studs happen to be.

That is the real reason the drywall price is higher. It is more measuring, more finding, and sometimes a decision about whether the spot you wanted is the spot the wall allows.

The single most common expensive mistake on this job is buying a fixed bracket before anyone has checked the wall. A full motion bracket on plasterboard can need a completely different mounting plan, and sometimes a different position, to the one you had in mind.

How to check which wall you have

  • Knock on it. A dull thud that sounds solid is masonry. A hollow sound with a bit of give is plasterboard.
  • Look at the skirting. Plasterboard walls usually have a thin skirting with a visible gap, and masonry walls usually have a deeper profile fixed hard against the wall.
  • Find a plug socket on that wall. If the box is set into brick or concrete you can often feel that when you press near it.
  • Check the same wall from the other side if you can. If you can see a stud pattern from a room being renovated, that tells you a lot.
  • If the wall is plasterboard and there is a fireplace, a chimney breast or a window alongside, the studs are often laid out around those features rather than evenly.

If you are unsure, photograph the wall and the skirting together. That combination answers the question often enough to price the job without a visit.

The bracket is not the place to save money

There is a large gap between the cheapest bracket on a shelf and a proper one, and the difference is in the steel and the mechanism rather than the branding. A light fixed bracket is fine for a small TV that will never move. It is not fine for a large screen on an extending arm, where the arm multiplies the load on the wall fixings every time it is pulled out.

In a coastal city there is a second consideration. Anything steel near the sea corrodes, and coastal homes around Summerstrand and Humewood deal with salt air year round. Galvanised or stainless hardware lasts. Cheap plated hardware does not, and the failure mode on a TV bracket is not a slow cosmetic one.

Cable concealment, and the honest answer

People usually ask about hiding cables in the same breath as mounting the TV, which is reasonable. What is achievable depends entirely on the wall. Surface trunking is neat, cheap and honest. Chasing a channel into brick and making good afterwards is a bigger job than the mounting itself, and it is not something to price over WhatsApp from a photo.

If the wall is plasterboard with a cavity behind it, a concealed drop is sometimes surprisingly quick. If it is solid masonry with a view to keeping the finish, expect it to be its own line item.

What is not included

  • The bracket, wall plate or cables. These are quoted separately and approved by you first.
  • Electrical work. A new socket behind the TV or any change to fixed wiring needs a registered electrician, not a handyman.
  • Chasing and plastering where a channel is cut into a finished wall.
  • Work above one storey, or anything needing scaffolding or a second person.

That last point matters if the wall is double volume or the TV is going up high in a stairwell. Say so when you send the photo and it gets priced properly the first time.

How the visit actually runs

Most mounts are done inside the quoted slot, and the work splits into three parts that are worth knowing about because they are where the surprises live. First the bracket goes onto the wall and gets levelled, which is the part that has to be right. Then the TV goes onto the bracket, which takes minutes. Then the cables get dressed and the tilt or the swivel gets set so the screen sits where you actually want it rather than where the bracket happened to land.

The middle step is why it is worth having a second pair of hands available if the screen is large. Not because it cannot be done alone, but because a screen that gets dropped while it is being lifted is a far more expensive morning than the mounting was.

It also pays to decide the height before the bracket is on the wall rather than after. The common rule is that the centre of the screen should sit at about eye level from where you usually watch, which sounds obvious and is regularly ignored in favour of going higher. A screen mounted too high is uncomfortable within a week, and moving it means filling and repainting the old holes as well as drilling new ones.

If there is a soundbar, a console or a shelf going up at the same time, say so in the same message. Those are separate jobs with their own prices, but they are trivial to add to the same visit and they get more expensive as a second booking because the travelling is charged twice.

The short version

Send a photo of the wall with a bit of skirting in the frame, tell me the screen size and the bracket you have or intend to buy, and you get a fixed price back before anything is booked. If the wall turns out to be different from what the photo suggested, the price gets discussed before work starts rather than added afterwards.

Mounting a TV is one of the jobs that pairs well with others. If there are pictures to hang, a shelf to fit or a cupboard door to rehang, put them on the same list. The travelling is already paid for, so the second and third job cost noticeably less than the first.

Got a list that needs working through?

Send it on WhatsApp with a photo or two and you get a price back, before anything is booked.

Send the list

More advice

The suburbs

Bluewater Bay, Seaview and Beachview: why a list beats a quick call-out

A single dripping tap is not worth the drive out to Beachview. A list of six jobs is. How north coast visits are planned and what tends to fail there.

Read it

Fittings

Shelves that actually hold: brackets, plaster and the weight question

Almost every shelf failure comes down to the bracket being chosen for the look rather than the wall. How to drill into the wall you actually have.

Read it

Pools

Getting the pool ready for December: the six-week plan

Recovery is a sequence, and it takes weeks because chemistry and filtration work on time. The six-week plan that makes December easy.

Read it

Pools

Pool filter sand and cartridges: the service most pools skip

A pool filter fails so slowly nobody notices until the water never quite clears. The signs, the media types, and what replacing it costs in Gqeberha.

Read it

Rentals

Landlord turnarounds in Lorraine, Framesby and Kabega Park: the punch list that gets the deposit back

The move-out punch list that gets a Gqeberha deposit back: room by room, what counts as wear and tear, the five repairs that cost tenants, and how to time a turnaround.

Read it

Assembly

A wardrobe and a bed, assembled: what breaks and what it costs to put right

A two door wardrobe and a bed base are the two items most often half-assembled. What each costs, the failures that break them, and when to rescue rather than replace.

Read it

Tiling

Tile over tiles or strip first? What each costs in Port Elizabeth

Tiling over an existing floor is faster and cheaper on paper. Here is when it is legitimate, what the height does to doors and skirtings, and what stripping really adds.

Read it

The suburbs

Older homes in Newton Park, Charlo and Mount Croix: the jobs that keep coming back

The older inner suburbs of Port Elizabeth share the same tired fittings. The five jobs that repeat across the area, what each costs, and how to batch them into one visit.

Read it

Plumbing

A toilet that keeps running: what it costs to fix

A running toilet has four causes and a two-minute diagnosis. Which part to replace, what it costs, and when it becomes a plumber's job.

Read it

Assembly

Flat pack assembly: time, tools and the parts that break

What is actually in the box, the tools that matter, where the time goes, and the four failures that turn a one visit job into two in Gqeberha.

Read it

Tiling

Tiling in Port Elizabeth: what it costs per square metre in 2026

The per square metre price is the most quoted number in tiling and the least useful one. Here is what the published ranges cover, and how to get a real figure.

Read it

Pools

Pool pump not working: the eight faults and what each one costs

A pool pump fails in one of three ways: silent, humming, or running without moving water. The two-minute check finds the fault, and each repair is priced per job.

Read it

Areas

A handyman visit in Summerstrand, Walmer and Newton Park

Three suburbs minutes apart, three different kinds of job. What salt air does on the beachfront, what older houses need in the centre, and what a visit covers.

Read it

Painting

Painting touch-ups after a repair: why the patch shows

A touched up patch almost always shows, even when the colour matches. What the wall has done to the old paint, and how far back a repair has to go.

Read it

Roofing

Roof leak repair in Port Elizabeth: what it costs in 2026

Roof work is the least predictable job on any list. What the money actually goes into, and what a leak costs to repair in Gqeberha.

Read it

Waterproofing

Roof waterproofing in Port Elizabeth: priced per job, not per square metre

Why this site prices a waterproofing job rather than a square metre, where tiled roofs actually fail on the coast, and what the work costs.

Read it

Doors

Why your door sticks in winter, and why sanding it makes next winter worse

A sticking door is the timber moving with the seasons, not the timber being too big. Sanding the edge clears it now and sets up next winter's return.

Read it

Scope

What a handyman can and cannot legally do in South Africa

The one line that decides whether a job is handyman work or a registered trade, and how to read the answer before you book anyone.

Read it

Assembly

Flat pack furniture assembly in Port Elizabeth: what it costs per item

Flat pack furniture is priced per item, not per box. What a bed and a wardrobe cost to assemble in Port Elizabeth, and why a missing fitting stalls the job.

Read it

Doors

Hanging a door in Port Elizabeth: what it costs and what is involved

A door is a slab of timber going into a frame that has had decades to move. What the job actually involves, and what it costs in Gqeberha.

Read it

Leaks

Water coming through the ceiling: what to do in the first hour

What to do in the first hour when water starts coming through a ceiling, why poking the bulge is a mistake, and how the leak is traced back to its actual source.

Read it

Landlords

A rental maintenance checklist for Gqeberha landlords and agents

Running a rental on a checklist instead of on complaints means one planned visit instead of five separate ones. The list, and what it costs.

Read it

Fitting

Curtain rails and blinds in Port Elizabeth: who fits them and what it costs

Shops sell the rail, the blind and the shelf, then leave you to fit them. What fitting costs per window in Port Elizabeth, and why the wall decides the fixing.

Read it

Small plumbing

A dripping tap in Port Elizabeth: what it costs and when it needs a registered plumber

A dripping tap costs you on the water bill and on your sleep. What the repair costs in Port Elizabeth, and where the plumber has to take over.

Read it

Odd jobs

No job too small: the odd jobs a handyman actually does

The hardest job to get done in a house is never the big one, it is the single small thing. Here is the actual list, and why batching them pays.

Read it

Coastal

Salt air and rust: what coastal Gqeberha does to doors, windows and fittings

Salt air corrodes the fittings that hold a coastal home together. What the sea does to doors, windows and gate hardware in Gqeberha, and what the repairs cost.

Read it

Cupboards

The cupboard hinge that pulled out of the chipboard

Once the screw holes in chipboard strip, tightening the same screw never works again. Here is which repair holds, and what it costs in Gqeberha.

Read it

Pricing

What a handyman costs in Gqeberha

What the common jobs actually cost in Gqeberha in 2026, why an hourly rate is a bad deal for the person paying, and how to judge a quote you have been handed.

Read it

The list

The small-job list: twelve things worth booking in one visit

The jobs that sit on the fridge door for a year. How long each one takes, which ones belong in one visit, and how to split a long list sensibly.

Read it

Complexes

Complex access: what to have ready before a handyman arrives

Access registers, POPIA requirements, noise hours and lift rules. The details that decide whether a booked visit starts on time or stalls at the boom.

Read it

Send the list. Get a price. Get it done.

One or twenty jobs, it makes no difference. The more you put on the list, the better the visit works out.

WhatsApp your listCall 067 397 3341

No price is agreed until you approve it

Call nowGet a quote