The per square metre price is the most quoted number in tiling and the least useful one. It is not dishonest. It is just that two quotes for the same room can both be correct and still be thousands of rand apart, because one is labour only and the other is supply and fit, one removes the old tiles and the other tiles over them, and one includes a floor that has to be levelled first.
This is what the published numbers actually cover, what changes them in a Port Elizabeth house, and how to get a figure you can plan a renovation around.
First, work out what the number covers
Three different numbers get called a tiling price, and mixing them up is where renovation budgets go wrong.
- Labour only. The tiler lays tiles you have already bought. This is the number most tilers quote first.
- Supply and fit. Tile plus adhesive, grout, spacers, trims and labour, priced per square metre.
- The room. Everything above, plus stripping, screeding, waterproofing in a wet area, and making good at the edges.
Per square metre answers the first two. It never answers the third, and the third is what you actually pay.
What the published national rates look like
Two South African cost sources in 2026 put the ranges this way, and they do not agree exactly, which is normal:
- TilerCostPerM2.co.za lists tiling labour at R90 to R300 per square metre, and all-in supply and fit at R200 to R800 per square metre. It puts a standard 5 to 10 square metre bathroom at R7 500 to R25 000 in total.
- ServiceLink SA breaks it down by tile type: ceramic installed at R230 to R500 per square metre, porcelain at R380 to R800, large format over 600mm at R550 to R1 000, mosaic at R550 to R1 200, and natural stone at R800 to R1 850 and up.
Those two sets of figures describe the same market from different angles, and both point at the same thing. The tile choice moves the number more than the tiler's rate does. Porcelain versus natural stone can double a floor before a single hour of labour changes.
Both sources also say plainly that their figures are national estimates and that contractors set their own rates. They are useful for sanity checking a quote. They are not a quote.
Why the ranges disagree
Four things move the number, and none of them are visible in a per square metre rate.
Tile size and format. Large format tiles look simple and are slower to lay. They need a flatter substrate, more adhesive, a different trowel and often two people to position them. Small mosaics are the opposite problem: cheap to buy, expensive in labour.
Room size. A 4 square metre cloakroom carries the same setup, travel and cutting waste as a 20 square metre living room. That is why the small room always costs more per square metre, and why a tiler quoting per square metre on a small room is not being greedy.
Pattern and cutting. Straight lay on a square room is the fastest work there is. Herringbone, brick bond, diagonal, or a room with six corners and a toilet to cut around all add hours.
The substrate. This is the one that surprises people. A floor that is out of level, has old adhesive residue, has been damp, or has a screed that crumbles needs preparation before any tile goes down. No tiler can quote that from a photograph.
What a Port Elizabeth bathroom actually comes to
Older housing stock in the inner suburbs, Newton Park, Charlo, Mount Croix and the areas around them, tends to bring three extras: floors that are not level, walls that are not square, and previous waterproofing that has reached the end of its life.
In a wet area that adds up to a strip, a screed, a waterproofing membrane and a re-tile. A straightforward bathroom retile with new tiles lands in the region ServiceLink's range describes. A bathroom where nothing is straight lands above it.
Two local factors matter more here than in Gauteng. Coastal humidity means the adhesive and grout have to be specified for the environment, not bought on price alone. And salt air does a number on cheap trims and aluminium edge strips, which is why a coastal job should use the right profile the first time.
Walls, floors and the tile you should not use
Wall tiles are thinner and lighter. Floor tiles take load and need a slip rating, especially outside where the south-easter brings rain onto a stoep. A glossy porcelain on an outdoor step is a slip hazard, and no amount of grout changes that.
In a bathroom, the shower floor and the shower walls are the two places where the waterproofing matters more than the tile. If the membrane is wrong, the tile choice is irrelevant, and the leak shows up as damp in the room next door three months later.
Porcelain is denser and handles moisture better than ceramic. Ceramic is cheaper and perfectly good on a dry interior wall. Natural stone is beautiful and demands sealing, maintenance and more careful adhesive. Choose on that basis rather than on a per square metre number.
Tiling over tiles, and what that really costs
Tiling over existing tiles is legitimate when the old floor is sound, flat and firmly bonded, and when the extra 10 to 15mm of height does not cause a problem at the door, the skirting or the shower.
What it saves is stripping and disposal. What it costs is height, and sometimes the skirting line. In a bathroom it is rarely worth it once you allow for the door clearance.
We have written about that decision separately, because it is its own question with its own numbers.
The small rooms where the per metre price lies
A kitchen splashback is the clearest example. Three square metres of tile, a handful of cuts around plugs and a window, and a wall that is almost never flat behind the cabinets. The per metre number looks cheap and the job is not, because the cutting is most of the work.
The same applies to a cloakroom, a scullery, or a single shower. Anything under about five square metres carries a fixed cost that has nothing to do with area: setting up, mixing adhesive, cutting, cleaning tools and travelling.
If you are pricing a small area and the quote looks high against a per metre rate you found online, that is usually the reason, and it is legitimate. What is not legitimate is a per metre rate that quietly excludes adhesive, grout and trims, then adds them at the bottom of the invoice.
Five questions that separate a real tiling quote from a number
- Is this labour only or supply and fit?
- Is the old tile being removed, and is disposal included?
- What happens if the floor needs levelling or the wall needs skimming? Is that priced, or is it a variation later?
- Is the waterproofing in the wet areas included, and what membrane is being used?
- How are the trims and skirting finished, and who supplies them?
A tiler who answers all five without hesitating is a tiler who has done this before. The one who answers three and changes the subject is going to be a problem in week two.
Why we quote per job and not per square metre
A per square metre rate is a promise made before anyone has seen the room, and the honest version of that promise almost always changes on site.
What we do instead: measure the room, check the substrate, agree the tile and the layout, and give you a fixed price for the job with the materials listed separately. If a floor turns out to need levelling, you hear it before the work starts rather than in an invoice afterwards.
Our tiling page carries the process. The pricing page carries the per-job ranges for the smaller work we do, including skirting, silicone and repairs, and it states plainly what is not included.
What to have ready before you ask for a price
- A rough measurement of the room, length by width, plus the wall heights if walls are being tiled.
- Whether the old tiles stay or go.
- Whether you have chosen the tile, and if so, its size and type.
- Photos of the floor and walls, especially anywhere it looks uneven or damp.
- The door clearance, if the floor is coming up.
That is enough for a serious first estimate. The fixed number comes after a visit, because anyone quoting a tiling job off a phone call is quoting a guess with confidence.
A per square metre rate is a promise made before anyone has seen the room. The fixed number comes after a visit, and that is what makes it a number you can plan around.
Book a measurement
If you are tiling a bathroom, a kitchen splashback or a floor in Gqeberha or Port Elizabeth, WhatsApp 067 397 3341 with the measurements and a photo. We will tell you what we see and what it will cost, and if the job needs a specialist waterproofing contractor, we will say so rather than absorb it.
Tiling a room in November is a far better idea than tiling it in the week before the family arrives in December.
Got a list that needs working through?
Send it on WhatsApp with a photo or two and you get a price back, before anything is booked.
Send the list